Kranzle 2170TST User Manual

24 21
do it yourself !do it yourself !
do it yourself !do it yourself !
do it yourself !
Nozzle dirty or sticky
Pressure gauge does not show full pressure
Water comes out in spurts.
If you do not use the high-pressure cleaner for some time the valves can stick
The high-pressure hose vibrates
Straighten a
paper clip...
When a valve is
blocked,
the gauge
shows little
pressure or
no pressure
at all,
or the high
pressure
hose
vibrates!
Open the
valve with a
socket wrench...
and remove the
valve screw, the
valve and the
o-ring.
Replace the rubber o-ring.
and remove the
dirt from the
valve - the valve
inside must be
closed.
Retighten the valve
screw
...and repeat
on all 6
valves.
Now it works
as well as
before!
Complete AssemblyComplete Assembly
Complete AssemblyComplete Assembly
Complete Assembly

Kranzle 2170TST Specifications

General

Brand	Kranzle
Model	2170TST
Category	Pressure Washer
Language	English