External suction
If water is to be sucked from an external container for the high pressure cleaner,
the connection hose
between the high
pressure pump and
the water tank must
be screwed off and
the suction hose
must be connected
directly to the pump.
Make sure that the
water is clean. Use
the Kränzle suction
hose with suction
lter. (Order N°. 15.038 3)
Maximum suction height 2.5 m, maximum water temperature for direct suc-
tion: 60°C
(see technical data on page 2)
Preparation for use
5. The machine must be connected to the water line
with cold water or up to 60° C warm water (see
page 2).
The hose cross section must be at least 3/4" =
16 mm (free passage). Filter 1 must always be
clean.
Please make sure that the lter is clean before
using your high pressure cleaner.
CAUTION !
When running your high pressure cleaner with hot water of 60° C rai-
sed temperatures occur.
Do not touch the pump without safety gloves!
13
1
Undercarriage
Undercarriage
To Next Page
Loading...
