9
Description
Brief operating instructions
1. Connect high pressure hose with spray gun.
2. Connect to suitable water supply.
3. Connect current - (400 Volt three-phase current)
4. Switch on machine and start cleaning.
5. After having completed the cleaning process, put main switch in zero po-
sition and by opening the gun, reduce the pressure in the high pressure
hose.
Then, the high pressure hose can be rolled up
- Only use clean water ! Protect from frost !
CAUTION !
Please pay attention to the regulations of your waterworks company.
Because of the water tank, the device can be connected to any drinking water line
without worries.
Brake not applied
Brake applied
Brake
To Next Page
Loading...
