7
Safety notes
Never operate the machine without supervision.
The machine may only be operated by persons who have been instructed accordingly.
Some parts inside the machine, all water conducting components and all metal parts
of gun and lance are hot during hot water operation. Keep all hoods and protective
covers closed during operation and never touch any metal parts of gun or lance.
Persons operating the machine should wear the necessary protective clothing, i.e.
waterproof clothing, rubber boots, safety goggles, headwear etc. It is prohibited to
use the machine in close vicinity to people lacking suitable protective clothing.
The high pressure spray can generate a high level of noise. If noise exceeds the
maximum allowed levels, users and others in the vicinity must wear suitable ear
protection
.
Do not spray against matter containing asbestos or other hazardous substances.
Only use light heating oil EL (DIN 51 603) or diesel (DIN EN 590). The use of any other
fuel may be hazardous and dangerous (risk of explosion).
For safety reasons always switch the main switch to "0"- postion after having fini-
shed the cleaning task (disconnection from power supply).
Bear in mind that during cleaning tasks
with a high-pressure water jet a significant
recoil at the lance arises (see technical
data on page 2).
Apply the safety catch on the spray gun
after each use, in order to prevent
unintentional spraying!
Always aim the underbody lance! Bear in
mind when using a curved or angled
spraying lance that there is a significant
amount of torque in the recoil!