How to fix leakage under the Bonnet nut in Kraus Arlo KVF-1200CH?
If you find leakage under the bonnet nut of your Kraus Plumbing Product because it has come loose, remove the index and tighten the bonnet nut using an adjustable wrench.
What to do if Kraus Arlo KVF-1200CH water will not shut off completely?
If your Kraus Plumbing Product won't shut off completely, the cartridge may need adjustment or replacement. First, remove the index. Then, tighten the bonnet nut with an adjustable wrench. If the issue persists, replace the cartridge.
What to do if there is leaking from the sink drain at the base of the sink in Kraus Arlo KVF-1200CH?
If you notice leaking from the sink drain at the base of the sink with your Kraus Plumbing Product, it could be due to a rough or irregular sink surface. Apply additional silicone sealant to the beveled edge of the sink and then test for leaks.
Instructions for removing existing faucet components before installation.
Guide for mounting the new faucet onto the countertop.
Procedure for connecting the faucet's water supply lines to angle stops.
Steps for installing the pop-up drain assembly for the vessel sink.
Final step to flush the faucet and clear debris after installation.
General| Finish | Chrome |
|---|---|
| Mounting Type | Deck Mount |
| Number of Handles | 1 |
| Flow Rate | 1.2 GPM |
| Material | Brass |
| Mounting | Deck Mounted |
| Valve Type | Ceramic Disc |
| Hole Count | 1 |
| Handle Type | Lever |
| WaterSense Certified | Yes |
| Lifetime Warranty | Yes |
| Product Type | Bathroom Faucet |
To Next Page