How to fix leakage under the handle of a Kraus Plumbing Product?
If you notice leakage under the handle of your Kraus Plumbing Product, it's likely the bonnet nut has come loose. To fix this, loosen the set screw using a hex wrench and remove the handle. Unscrew the cap by hand, then tighten the bonnet nut with an adjustable wrench.
Why does my Kraus Plumbing Product aerator drip or have inconsistent water flow?
If your Kraus Plumbing Product aerator drips or has inconsistent water flow, it's likely that the aerator is either dirty or not seated correctly. Use an aerator wrench to unscrew the aerator and clean out any debris.
What to do if my Kraus Plumbing Product water will not shut off?
If your Kraus Plumbing Product won't shut off, the cartridge may need adjustment or replacement. First, remove the index, loosen the set screw using a hex wrench, and remove the handle. Then, unscrew the cap by hand and tighten the bonnet nut with an adjustable wrench. Finally, remove the cartridge and inspect it for any cracks.
What to do if there's leaking from the sink drain at the base of my Kraus Plumbing Product sink?
If there is leaking from the sink drain at the base of your Kraus Plumbing Product sink, it could be due to a rough or irregular sink surface. Apply additional sealant to the beveled side of the drain flange, then retighten and test for leaks.
Lists essential tools for faucet installation.
Provides instructions for cleaning and maintaining the faucet's finish.
Instructions for removing existing washers and nut from the old faucet.
Guide for mounting the new faucet onto the countertop.
Details on attaching waterlines to the main water supply.
Instructions for installing the press pop-up drain assembly.
Procedure for flushing the faucet and removing debris after installation.
Details the lifetime limited warranty coverage for faucet structure and finish.
Outlines the one-year warranty for commercial applications.
Instructions for proper cleaning to avoid voiding the warranty.
Provides contact information and procedure for submitting a warranty claim.
Explains limitations on implied warranties and consequential damages.
General| Mounting | Deck Mount |
|---|---|
| Number of Holes Required | 1 |
| Flow Rate | 1.2 GPM |
| Handle Style | Lever |
| Number of Handles | 1 |
| Material | Brass |
| Hole Count | 1 |
| Handle Type | Lever |
| ADA Compliant | Yes |
| Warranty | Limited Lifetime |
| Finish | Brushed Nickel |
To Next Page