Need help?Do you have a question about the Kraus KHF200-30 and is the answer not in the manual?
General| Sink Type | Undermount |
|---|---|
| Installation Type | Undermount |
| Faucet Material | Brass |
| Faucet Finish | Chrome |
| Spout Reach | 8 inches |
| Handle Type | Lever |
| Flow Rate | 1.8 GPM |
| Faucet Installation Type | Deck Mount |
| ADA Compliant | Yes |
| Material | Stainless Steel |
| Dimensions | 30 x 18 x 10 inches |
| Number of Bowls | Single |
| Hole Configuration | 1 Hole |
| Warranty | Lifetime |
| Gauge | 16 Gauge |
Details on measuring and building supports for the sink installation.
Instructions for cutting the front of the base cabinet for sink installation.
Procedure for placing and securing the sink in the cabinet opening.
Guidance on cutting the countertop to fit the sink cutout.
Connecting the drain, trap, and water supply for the sink faucet.
Instructions for installing the faucet base without a deck plate.
Instructions for installing the faucet base with a deck plate.
Procedure for attaching the faucet body to the installed base.
Method for tightening the faucet to the base using a set screw.
Connecting the faucet's hot and cold water supply lines to the valve.
Attaching the spray hose via the quick connect mechanism.
Attaching the hose weight to the spray hose for proper retraction.
Flushing the faucet to remove debris before initial use.
Disassemble the soap dispenser components before installation.
Install the dispenser base through the countertop hole.
Screw the dispenser bottle to the base and fill with soap.
Insert the pump into the dispenser base and test its function.
To Next Page
