Need help?Do you have a question about the Kraus KCA-1200 and is the answer not in the manual?
General| Brand | Kraus |
|---|---|
| Model | KCA-1200 |
| Category | Plumbing Product |
| Language | English |
Essential checks and preparations before installing the sink.
List of necessary tools for sink installation.
Key measurements and model details for the sink.
Select the desired reveal type for the sink installation.
Place and trace the cutout template on the countertop.
Cut the opening in the countertop using the template.
Set up mounting brackets and drill holes for sink installation.
Insert anchors and secure the sink with adhesive.
Fasten the sink bowl using the mounting hardware.
Connect drain, trap, and water supply to the sink and faucet.
Identifies all parts of the faucet assembly.
Provides detailed measurements for the faucet.
Disconnect and remove the old faucet's mounting hardware.
Insert the faucet body through the sink hole.
Assemble and secure the faucet using washers, nuts, and connectors.
Connect the faucet's supply lines to the water valves.
Flush lines, check for leaks, and finalize the faucet installation.
Identifies parts for ST-1, ST-2, BST-1, BST-2, and ST-3 strainers.
Provides detailed measurements for various strainer models.
Step-by-step guide for disassembling and installing the kitchen strainer.
Solutions for common problems encountered with the faucet or sink.
Guidelines for cleaning and maintaining the product's finish and function.
Details the warranty coverage for the Kraus kitchen sink.
Details the warranty coverage for the Kraus faucet.
Details the warranty coverage for Kraus accessories.
To Next Page
