Need help?Do you have a question about the Kraus KGD-433B and is the answer not in the manual?
Locate and cut the opening on the countertop using the drop-in template.
Use a drill and jigsaw to carefully cut the countertop opening along the traced line.
Drill an optional additional hole for a faucet using a diamond hole saw.
Apply sealant and secure the sink to the countertop using mounting brackets.
Assemble and install the sink drain, including the strainer and rubber seal.
Connect the faucet and plumbing for water supply and waste disposal.
Locate and cut the opening on the countertop using the undermount template.
Use a drill and jigsaw to carefully cut the countertop opening along the traced line.
Drill an optional additional hole for a faucet using a diamond hole saw.
Align sink, drill fixation holes, insert brass inserts, and secure with mounting clips.
Assemble and install the sink drain, including the strainer and rubber seal.
Connect the faucet and plumbing for water supply and waste disposal.
Warranty information for commercial purchasers of Kraus products.
Instructions on how to clean the sink without voiding the warranty.
Details of damages and situations not covered by the product warranty.
Details on the maximum duration of implied warranties as permitted by law.
Exclusions and limitations on special, incidental, or consequential damages.
Steps to activate the product warranty online.
How to access customer support services for assistance.
Information on how to obtain product details and updates.
Locate and cut the opening on the countertop using the drop-in template.
Use a drill and jigsaw to carefully cut the countertop opening along the traced line.
Drill an optional additional hole for a faucet using a diamond hole saw.
Apply sealant and secure the sink to the countertop using mounting brackets.
Assemble and install the sink drain, including the strainer and rubber seal.
Connect the faucet and plumbing for water supply and waste disposal.
Locate and cut the opening on the countertop using the undermount template.
Use a drill and jigsaw to carefully cut the countertop opening along the traced line.
Drill an optional additional hole for a faucet using a diamond hole saw.
Align sink, drill fixation holes, insert brass inserts, and secure with mounting clips.
Assemble and install the sink drain, including the strainer and rubber seal.
Connect the faucet and plumbing for water supply and waste disposal.
Warranty information for commercial purchasers of Kraus products.
Instructions on how to clean the sink without voiding the warranty.
Details of damages and situations not covered by the product warranty.
Details on the maximum duration of implied warranties as permitted by law.
Exclusions and limitations on special, incidental, or consequential damages.
Steps to activate the product warranty online.
How to access customer support services for assistance.
Information on how to obtain product details and updates.
General| Brand | Kraus |
|---|---|
| Model | KGD-433B |
| Category | Plumbing Product |
| Language | English |
To Next Page
