Need help?Do you have a question about the Kraus KHF200-33 and is the answer not in the manual?
General| Type | Kitchen Sink |
|---|---|
| Material | Stainless Steel |
| Size | 33 inches |
| Gauge | 16 |
| Installation Type | Undermount |
| Finish | Brushed |
| Soundproofing | Yes |
| Minimum Cabinet Size | 36 inches |
| Handle Type | Lever |
| Flow Rate | 1.8 gpm |
| ADA Compliant | Yes |
| Sink Dimensions | 33 x 19 x 10 inches |
| Warranty | Limited Lifetime |
Lists all tools needed for sink installation.
Detailed dimensions for KHF200-30 sink.
Detailed dimensions for KHF200-33 sink.
Detailed dimensions for KHF200-36 sink.
Detailed dimensions for KHF203-33 sink.
Detailed dimensions for KHF203-36 sink.
Detailed dimensions for KHF204-33 sink.
Lists recommended materials for sink supports.
Guide on placing and leveling the sink securely.
Explains positive, negative, and flush reveal options.
Advice on using acetone for excess sealant.
Connecting drain, trap, and water supply, checking for leaks.
Lifetime warranty for structure and finish.
Conditions that void the sink warranty.
One-year warranty for commercial use.
Lists strainer models: ST-1, ST-2, ST-3, BST-1, BST-2.
Lists essential tools for strainer installation.
Diagram and list of parts for ST-1 strainer.
Diagram and list of parts for ST-2 strainer.
Diagram and list of parts for BST-1 strainer.
Diagram and list of parts for BST-2 strainer.
Diagram and list of parts for ST-3 strainer.
Dimensions for ST-1 and ST-2 strainers.
Dimensions for BST-1 and BST-2 strainers.
Dimensions for ST-3 strainer.
Inserting the metal strainer and main body.
Details the one-year warranty for Kraus accessories.
Conditions that void the accessories warranty.
One-year warranty for commercial accessory applications.
To Next Page
