A
asandovalJul 29, 2025
Why is there low water flow in my Kraus Bolden KSF-1610?
- DDakota JonesJul 29, 2025
A low water flow or a non-functioning LED indicator in your Kraus Plumbing Product can be caused by a dirty or damaged washer in the control box, or a dirty filter washer in the hose connectors. To resolve this: Remove the hose and unscrew the connector to check the washer, clean or replace it if needed. Also, turn off the water supply and unscrew the hose connectors to clean the filter washers with hot water, removing any debris or calcium buildup.