Need help?Do you have a question about the Kraus Bellucci Series and is the answer not in the manual?
Essential checks and considerations before starting the sink installation process.
Lists all necessary tools and components for a successful sink installation.
Details the mounting clips and hardware provided with the undermount sink.
Provides detailed measurements for each model and minimum cabinet size requirements.
Guidance on selecting the desired sink reveal using the paper template.
Instructions for accurately placing and marking the countertop for the cutout.
Procedures for safely cutting the countertop opening following the traced line.
Steps for drilling fixation holes for mounting brackets at specified depths.
Instructions for applying sealant and firmly attaching the sink to the countertop.
Connecting the sink drain, trap, and water supply lines according to instructions.
Recommendations for regular cleaning to preserve the sink's finish and appearance.
Details the terms and conditions of the manufacturer's limited lifetime warranty.
Explains the procedure for consumers and professionals to request warranty service.
Instructions for registering the product to activate the warranty and access support.
The provided document is an installation manual for Kraus Bellucci™ Series Undermount Kitchen Sinks, specifically models KGUW1-30, KGUW1-33, KGUW2-30, and KGUW2-33. This manual guides users through the process of installing these kitchen sinks and provides essential information regarding their care, maintenance, and warranty.
The Kraus Bellucci™ Series Undermount Kitchen Sinks are designed to be installed beneath a countertop, creating a seamless and integrated look in a kitchen. As kitchen sinks, their primary function is to provide a basin for washing dishes, preparing food, and other kitchen-related tasks that require water. The undermount design offers practical benefits, such as easier countertop cleaning, as crumbs and liquids can be wiped directly into the sink without catching on a rim. The Bellucci™ series likely emphasizes both aesthetic appeal and functional durability, typical of Kraus products, to enhance the overall kitchen experience.
The installation process for these sinks involves several key steps, starting with determining the desired "reveal type" (Negative, Positive, or Flushed Reveal) using a provided template. This choice allows for customization of how the sink edge interacts with the countertop opening. The template is then positioned and traced onto the countertop, followed by cutting the opening. The manual emphasizes safety during this step, recommending safety glasses and cut-resistant gloves.
Once the countertop is prepared, the sink is aligned, and mounting brackets are set up around its frame. Fixation holes are drilled into the countertop at a specific depth and diameter (15/64" drill bit to a depth of 3/8"). Anchors are then optionally installed into these holes, followed by applying a bead of silicone or adhesive around the sink's rim before placing it into the cutout and pressing firmly. The mounting hardware is then attached to secure the bowl, and excess sealant is removed. A crucial step involves allowing the sealant to set for 30-60 minutes. Finally, plumbing fixtures, including the drain, trap, and water supply connections, are installed according to the manufacturer's instructions, and the system is checked for leaks.
The manual also highlights important considerations before installation, such as checking for all necessary parts, inspecting the sink for damage, using the provided cut-out template, and observing all local plumbing and building codes. It also notes that specialized tools may be required for countertops made of materials other than wood, marble, or granite.
Proper care and maintenance are crucial for the longevity and performance of the Kraus Bellucci™ Series Undermount Kitchen Sinks. The manual provides clear guidelines for this. Users are advised to clean the sink regularly using warm soapy water. After using any cleaning products, it is important to rinse the sink thoroughly. To prevent water spots and residue buildup, the sink surface should be wiped with a soft cloth after use.
The manual also outlines specific practices to avoid to prevent damage and maintain the product's warranty. Users should not cut food directly on the surface of the sink, as this can cause scratches or other damage. Leaving sharp objects on the sink surface for extended periods is also discouraged. Furthermore, the use of abrasive cleaning products (such as powders, bleach, ammonia, alcohol, or chlorine), sanding tools, steel wool, or bleaching products is strictly prohibited. The use of such products can affect the product's performance and may void the warranty.
The warranty information provided in the manual further underscores the importance of proper maintenance. The Kitchen Sink comes with a Lifetime Limited Warranty for the original purchaser for personal household use, covering defects in material and workmanship under normal usage. For commercial purchasers, a one-year warranty is provided. The warranty explicitly states that it does not cover damage resulting from neglect, misuse (including use for an unintended application), abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance, alteration of the Product, or failure to follow care, cleaning, or installation instructions. Kraus recommends that all products be installed by a fully licensed and insured trade professional to ensure proper installation and prevent issues that could void the warranty.
General| Brand | Kraus |
|---|---|
| Material | Brass |
| Handle Type | Lever |
| Flow Rate | 1.2 GPM |
| ADA Compliant | Yes |
| Series | Bellucci |
| Finish | Chrome |
| Spout Height | 8.5 inches |
| Warranty | Limited Lifetime Warranty |
To Next Page