55
Hardware (Included)
Kit for Undermount
Installation
Important
· Instructions may vary depending on countertop material. Read all instructions
carefully, and ensure that counters are compatible with sink installation before
proceeding.
· Follow the plumber’s code and builder’s code effective in your area.
· Shut off water valves prior to installation.
· Open sink packaging and verify that the sink is in perfect condition. Put sink back
into packaging to protect it until time of installation.
· To replace an existing sink, make sure that the cut-out hole in the counter is of an
adequate size to fit the new sink.
Replacement parts list
KP31003 - Undermount Clips (10 hooks)
To Next Page
Loading...
