Kraus Bolden Series User Manual

3
Prior to Installation:
· Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Kraus
Customer Service at 800-775-0703 for a replacement.
· Turn off the hot and cold water supply at the angle stops and turn on
the old faucet to release any built up pressure. Remove existing faucet.
Clean sink or countertop to remove any debris, plumber’s putty, or
silicone.
· Flush angle stops to release any debris prior to installation.
· Pre-drilled hole size requirement: 1 3/8" (min)
· Max countertop thickness: 2 1/2”
· 1, 2 or 3 hole installation with optional deck plate (sold separately)
Tools Required
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
Adjustable Wrench Phillips Screwdriver
Safety Goggles
Pipe Tape
Silicone Sealant

Kraus Bolden Series Specifications

General

Faucet Type	Pull-Down
Material	Brass
Flow Rate	1.8 GPM
Number of Holes	1
Handle Type	Lever
Number of Handles	1
Number of Holes Required	1
Warranty	Limited Lifetime Warranty
Finish	Multiple finishes available
Installation Type	Deck Mount
Spray Modes	2
Cartridge Type	Ceramic
Certifications	cUPC, NSF