Kraus GV-204 - User Manual

Glass Vessel Sinks
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV. September 2, 2020
R
INSTALLATION MANUAL

Summary

Product Overview and Support

Introduction and Customer Service

Welcome message, important notices, and contact information for customer service.

Pre-Installation and Specifications

Preparation and Guidelines

Pre-installation checks, recommendations for professional installation, and technical assistance.

Product Dimensions

Detailed dimensions for various round and rectangular glass vessel sinks and their models.

Installation Procedures

Rough-In Dimensions

Diagram and measurements for countertop cutouts and rough-in specifications for sink installation.

Above Counter Installation

Step-by-step instructions for mounting a vessel sink above the countertop.

Drain and Mounting Ring Installation

Detailed instructions for assembling and installing the pop-up drain and mounting ring components.

Warranty, Registration, and Maintenance

Warranty Information

Details on Kraus lifetime limited warranty, restrictions, and commercial warranty.

Product Registration and Resources

Instructions for registering products, downloading guides, and customer support contacts.

Troubleshooting and Parts

Guide for resolving common issues, warranty service contacts, and detailed parts lists.

Model Specific Details

PU-10;PU-L10 Diagrams and Parts

Diagrams, parts lists, and installation steps for specific drain models.

Care and Maintenance

Guidelines for cleaning and maintaining the product to ensure longevity and shine.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document is an installation manual for Kraus Glass Vessel Sinks, providing detailed instructions for installation, dimensions, and warranty information. It also includes a separate installation guide for the Kraus POP-UP DRAIN PU-10/PU-L10, which is often used in conjunction with these sinks.

Function Description:

The Kraus Glass Vessel Sinks are designed to be an aesthetic and functional addition to a bathroom. They are installed above the counter, providing a distinctive look compared to traditional undermount or drop-in sinks. The manual covers various models, each with specific dimensions, including round and rectangular shapes, and different glass thicknesses. The primary function of these sinks is to collect and drain water for handwashing and other bathroom activities.

The POP-UP DRAIN PU-10/PU-L10 is an essential component that works with the vessel sinks to manage water drainage. Its pop-up mechanism allows users to easily open and close the drain, controlling water retention in the sink. The drain assembly includes several gaskets and washers to ensure a watertight seal, preventing leaks.

Usage Features:

For the Glass Vessel Sinks:

• Above-Counter Installation: These sinks are designed for above-counter placement, making them a focal point in the bathroom. The installation process involves drilling a 1 3/4" drain hole in the countertop and placing the sink on a mounting ring (if included) or directly on the countertop.
• Variety of Designs: The manual illustrates several models with different dimensions and shapes (round, rectangular), offering choices to match various bathroom aesthetics. Some models feature different glass thicknesses, which can influence their visual weight and durability.
• Compatibility with Pop-Up Drains: The sinks are designed to work with standard pop-up drains, specifically the Kraus PU-10/PU-L10, ensuring proper drainage and water retention.

For the POP-UP DRAIN PU-10/PU-L10:

• Pop-Up Mechanism: The drain features a simple pop-up mechanism for easy opening and closing, allowing users to fill the sink with water or drain it quickly.
• Secure Sealing: The drain assembly includes multiple gaskets and washers (thin gasket, concave gasket, plastic washer, firm washer, inner black rubber washer, white rubber washer) to create a secure, leak-proof seal between the drain body and the sink/countertop.
• Adjustable Components: The tailpiece and mounting nut are designed for adjustment to ensure a snug fit during installation, accommodating variations in sink and countertop thickness.
• Two Models (PU-10 and PU-L10): The manual details two models of the pop-up drain, PU-10 and PU-L10, which likely differ in length or specific design features to suit different installation requirements.

Maintenance Features:

For both the Glass Vessel Sinks and the Pop-Up Drain:

• Cleaning Instructions: The manual provides clear guidelines for maintaining the product's appearance. It recommends rinsing with clean water and drying with a soft cloth.
• Avoid Harsh Cleaners: Users are explicitly advised against using soaps, acids, polishes, abrasives, or harsh cleaners, as these can damage the finish.
• Avoid Abrasive Materials: The use of abrasive pads, steel wool, or wire brushes is also discouraged to prevent damage and wear down the finish of both the sink and the drain.
• Professional Installation Recommended: For the glass sinks, it is recommended that installation be done by a professional plumber, which can help prevent issues that might arise from improper installation and potentially void the warranty.
• Warranty Coverage: Kraus offers a lifetime limited warranty for the Glass Sinks (for the structure and finish) and a one-year warranty for the Pop-Up Drain (for structure and finish) for personal household use. This warranty covers defects in material and workmanship under normal usage.
• Restrictions on Warranty: The warranty does not cover damage due to negligence, misuse, abuse, improper installation, carelessness, accidents, hard water or mineral deposits, exposure to corrosive materials, misapplication, improper maintenance, alteration of the product, or failure to follow care instructions. It also excludes antediluvian, discontinued, or display products, and labor charges for removal/reinstallation.
• Commercial Warranty: A separate one-year commercial warranty is provided for products used in industrial, commercial, and business settings.
• Customer Support: Kraus provides customer service contact information (toll-free number and email) for technical assistance, replacement parts, and warranty service. Users are encouraged to have their model number and proof of purchase ready when contacting support.
• Online Resources: The manual directs users to the Kraus website (www.kraususa.com) for more information, to register their product for warranty activation, and to download a comprehensive Care & Maintenance Guide.

Overall, the manuals emphasize proper installation and gentle cleaning practices to ensure the longevity and aesthetic appeal of the Kraus Glass Vessel Sinks and their accompanying pop-up drains.

Kraus GV-204 Specifications