Need help?Do you have a question about the Kraus Indy KSB-10001 and is the answer not in the manual?
General| Material | Brass |
|---|---|
| Finish | Chrome |
| Installation Type | Deck Mount |
| ADA Compliant | Yes |
| Bowl Configuration | Single Bowl |
| Spout Height | 8.5" |
| Spout Reach | 6.5" |
| Hole Count | 1 |
| Aerator Included | Yes |
| Warranty | Lifetime |
Instructions for removing the old faucet and installing the faucet body, supply hoses, and sensor cable through the sink hole.
Details on securing the faucet assembly using the washer and lock nut, and installing the sensor control box connections.
Instructions for connecting hot and cold water hoses to the mixing valve and sensor control box for dual water mode.
Instructions for connecting the cold water hose and installing the battery pack into its housing.
Mounting the battery pack to the wall and connecting waterlines to the main valve for hot/cold water.
Connecting cold waterlines and flushing the system to check for leaks, then reinstalling the aerator.
How to activate the sensor for water flow and adjust water temperature settings, including water-saving features.
Sensor light flashes continuously and slowly, indicating battery replacement is needed.
Water flow not activating or not turning off correctly when hand is near the sensor.
Low water flow or non-functioning LED indicator, possibly due to a dirty or damaged washer in the control box.
To Next Page