Need help?Do you have a question about the Kraus KBU14E and is the answer not in the manual?
General| Material | Stainless Steel |
|---|---|
| Sink Type | Undermount |
| Bowl Configuration | Single Bowl |
| Gauge | 16 |
| Hole Count | 1 |
| Installation Type | Undermount |
| ADA Compliant | Yes |
| Warranty | Limited Lifetime |
| Drain Size | 3.5 inches |
| Minimum Cabinet Size | 18 in |
| Spout Height | Not Applicable |
| Spout Reach | Not Applicable |
| Finish | Brushed Satin |
Identifies the specific Kraus sink models covered in this manual.
Provides essential contact details for customer service and technical assistance.
Ensures all parts are present and the sink is inspected before installation begins.
Highlights the importance of adhering to local plumbing and building codes.
Lists the necessary tools for the sink installation process.
Details the components provided with the Kraus sink for installation.
Provides detailed measurements for the KBU14E sink model.
Provides detailed measurements for the KBU22E sink model.
Provides detailed measurements for the KBU24E sink model.
Select and prepare the desired reveal type (Negative, Positive, or Flushed).
Align the cut-out template on the countertop and trace the outline.
Carefully cut the countertop opening following the traced line.
Set up mounting brackets and drill holes for sink installation.
Install anchors and secure the sink to the countertop with adhesive.
Attach mounting hardware and connect plumbing fixtures.
Details the terms and conditions of the Kraus lifetime warranty for kitchen sinks.
Outlines limitations and conditions that are not covered by the product warranty.
Specifies the warranty terms for products used in industrial, commercial, and business settings.
Instructions and link to register the product for warranty activation and support.
To Next Page