Prior to Installation:
·
·
Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Kraus
Customer Service at 800-775-0703 for a replacement.
Turn off the hot and cold water supply at the angle stops and turn on
the old faucet to release any built up pressure. Remove existing faucet.
Clean sink or countertop to remove any debris, plumber’s putty, or
silicone.
·
·
·
·
·
Place bucket under angle stops. Turn on to flush any debris prior to
installing mew plumbing. Shut off angle stops.
Pre-drilled hole size requirement: 1 3/8" (min) - 1 1/2" (max)
Max countertop thickness without deck plate: 1 1/2”
Max countertop thickness with deck plate: 1”
1, 2 or 3 hole installation
Without deck plate:
1/16” (1mm) min.
1-1/2” (38 mm) max.
Ø 1-3/8” (35 mm) min.
Ø 1-1/2” (38 mm) max.
With deck plate:
1/16” (1mm) min.
1” (25.4 mm) max.
Ø 1-3/8” (35 mm) min.
Ø 1-1/2” (38 mm) max.
Tools Required
Adjustable Wrench
Bucket Silicone Sealant Safety Goggles
3
To Next Page
Loading...
Need help?
General
