Krautkramer DM4 User Manual

Krautkramer DM4E / DM4 / DM4 DL Issue 05, 01/01 7-3
Printing data Documenting measurement values (DM4 DL only)
Selecting the baud rate
With regard to data transfer, you will find the selection
of settings in the SPEC menu.
You can select the data transfer rate (baud rate) with
which the data is sent to the printer or PC.
H Note:
The baud rate setting must correspond to the setting
of the printer or PC.
Operation:
– Press m until SPEC is displayed.
– Press u or d until BAUD is displayed.
– Press c.
The active setting is displayed (basic setting 9600).
– Select a setting with u or d:
1200 low speed
2400
4800
9600 high speed
– Acknowledge with c.
You remain in the SPEC menu.
Selecting the report language
You can select the language in which your report is
printed or transferred to a PC.
Operation:
– Press m until SPEC is displayed.
– Press u or d until LANG is displayed.
– Press c.
The previous setting is displayed.
Krautkramer DM4E / DM4 / DM4 DL Issue 05, 01/01 7-3
Printing data Documenting measurement values (DM4 DL only)
Selecting the baud rate
With regard to data transfer, you will find the selection
of settings in the SPEC menu.
You can select the data transfer rate (baud rate) with
which the data is sent to the printer or PC.
H Note:
The baud rate setting must correspond to the setting
of the printer or PC.
Operation:
– Press m until SPEC is displayed.
– Press u or d until BAUD is displayed.
– Press c.
The active setting is displayed (basic setting 9600).
– Select a setting with u or d:
1200 low speed
2400
4800
9600 high speed
– Acknowledge with c.
You remain in the SPEC menu.
Selecting the report language
You can select the language in which your report is
printed or transferred to a PC.
Operation:
– Press m until SPEC is displayed.
– Press u or d until LANG is displayed.
– Press c.
The previous setting is displayed.

Krautkramer DM4 Specifications

General

Brand	Krautkramer
Model	DM4
Category	Measuring Instruments
Language	English