Kreg Micro-Pocket Drill Guide Kit 730 User Manual

English
2
French
11
Spanish
21
OWNER’S MANUAL
We’re here to help.
We want you to have an exceptional project building experience.
If you have questions or need support, please get in touch.
1-800-447-8638 | technicalsupport@kregtool.com
Tell us about your experience.
Your opinion counts. And we’re always looking for ways to
improve. Share your feedback so we can keep growing and
innovating for you. www.kregtool.com/feedback
WARNING Every user must read and follow instructions and safety
precautions in this manual. Failure to do so could result in serious injury.
Save manual for future reference.
Kreg Micro-Pocket™ Drill
Guide Kit KPHA730

Kreg Micro-Pocket Drill Guide Kit 730 Specifications

General

Brand	Kreg
Model	Micro-Pocket Drill Guide Kit 730
Category	Power Tools Accessories
Language	English

Summary

Safety Precautions

Pre-Installation/Pre-Assembly

Assembly/Setup

Operation – Drilling Your First Pocket Hole

Determine the Material Thickness and Set the Stop Collar

Guide on setting the stop collar on the drill bit for correct material depth.

Position your Workpiece

Methods for aligning the Kreg Jig with the workpiece for accurate drilling.

Operation – Drilling and Driving Pocket-Hole Screws

Drill Pocket Holes

Instructions on drilling pocket holes using the drill bit and stop collar.

Drive Screws

Guidance on selecting and driving screws into pocket holes for various material thicknesses.

Accessories