Need help?Do you have a question about the Kreg ProPack K2000-PP and is the answer not in the manual?
General| Brand | Kreg |
|---|---|
| Model | ProPack K2000-PP |
| Category | Cables and connectors |
| Language | English |
Guides setting the depth collar on the drill bit for precise pocket hole drilling.
Details preparing materials and drilling pocket holes using the jig.
Explains how to drive screws to create a strong and flush pocket hole joint.
Guidance on spacing pocket holes for different workpiece widths to maximize joint strength.
Instructions for using the Rocket Jig to join 1/2 inch thick material.
Instructions for using the Mini Kreg Jig to join 1/2 inch thick material.
Instructions for using the Mini Kreg Jig to join 3/4 inch thick material.
Instructions for using the Mini Kreg Jig to join 1-1/2 inch thick material.
Guidance on selecting the appropriate screw type and thread for pocket hole joinery.
Explanation of fine, coarse, and Hi-Lo thread types and their applications.
Description of Maxi-Loc (washer head) and Pan head screw styles.
Guidance on selecting screw lengths based on material thickness and jig settings.
Chart showing screw penetration for 1/2 inch material thickness with various screw sizes.
Chart showing screw penetration for 3/4 inch material thickness with various screw sizes.
Chart showing screw penetration for 1-1/2 inch material thickness with various screw sizes.
Troubleshooting tips for wood splitting issues when driving screws.
Troubleshooting advice for screw heads breaking off during driving.
Troubleshooting advice for wood movement issues during pocket hole joinery assembly.
To Next Page