Need help?Do you have a question about the Kreg Rocket Jig R1 and is the answer not in the manual?
General| Brand | Kreg |
|---|---|
| Model | Rocket Jig R1 |
| Category | Cables and connectors |
| Language | English |
Sets the depth collar on the drill bit for accurate pocket hole creation.
Details preparing workpieces and drilling pocket holes using the jig.
Explains driving screws to assemble the joint.
Instructions for joining 1/2" thick material with the K2000 jig.
Instructions for joining 3/4" thick material with the K2000 jig.
Instructions for joining 1-1/2" thick material with the K2000 jig.
Explains how to adjust jig spacing for different material widths.
Details thread types and their applications in pocket hole joinery.
Explains the Maxi-Loc (washer) and Pan head screw styles.
Provides guidance on selecting the appropriate screw length.
Illustrates screw penetration for the 1/2" material setting.
Illustrates screw penetration for the 3/4" material setting.
Illustrates screw penetration for the 1-1/2" material setting.
Recommends thread types based on wood hardness.
Provides general rules for screw length based on material thickness.
Offers solutions for wood splitting issues.
Addresses issues with screw heads breaking off.
Recommends screws for 1/2" plywood applications.
To Next Page