Need help?Do you have a question about the Kreg Mini MKJ and is the answer not in the manual?
General| Brand | Kreg |
|---|---|
| Model | Mini MKJ |
| Category | Cables and connectors |
| Language | English |
First step to set drilling depth of drill bit using depth collar on shank.
Guidance on selecting the right size board for mounting the K2000 Kreg Jig®.
Instructions for joining 1/2”, 3/4”, and 1-1/2” thick materials with the K2000 Jig.
Tips for portable use and how to utilize the K2000 Kreg Jig® support wings effectively.
Description of the Rocket™ Jig's sliding base plate for clamp integration.
Instructions for joining 1/2”, 3/4”, and 1-1/2” thick materials with the Rocket™ Jig.
Details the recess for seating pocket hole plugs with the Mini Kreg Jig®.
Instructions for joining 1/2”, 3/4”, and 1-1/2” thick materials with the Mini Kreg Jig®.
Explanation of fine, coarse, and Hi-Lo thread types for pocket hole screws.
Overview of Maxi-Loc (washer) and Pan head styles for Kreg screws.
Guide to selecting pocket hole screw length based on material thickness.
Answers common questions about screw type, length, and wood splitting issues.
Specific advice for selecting screws for use with plywood materials.
Defines face frame parts and provides standard dimensions for construction.
Detailed procedure for constructing a face frame using pocket hole joinery.
Defines leg and rail parts and typical dimensions for table/chair assembly.
Describes set-back rails, flush rails, and gusset supports for leg and rail joints.
Defines miter joint parts and standard dimensions for miter cuts.
Procedure for creating and assembling mitered joints using pocket holes.
Defines angle joint parts and explains building an assembly jig.
Procedure for creating and assembling angled joints with pocket holes.
Defines edgebanding parts and outlines the steps for assembling edgebanding.
Provides standard dimensions and steps for edgejoining workpieces for tabletops.
Details the anatomy of pocket hole plugs and the steps for plugging holes.
Answers questions on drill requirements, depth, pilot holes, and melamine/MDF use.
Addresses panel spacing, wood movement, and expansion/contraction concerns.
Covers joint strength, plug fit/sanding, shrinking plugs, and glue usage.
Provides information on maximizing drill bit life and the Kreg bit sharpening service.
Information on the lifetime warranty for drill guides and the 30-day satisfaction guarantee.
Provides contact information for Kreg Tool Company for questions and support.
To Next Page