The single drill guide Mini Kreg Jig
®
is our most positionable pocket hole
tool. The jig is designed without an alignment fence which allows it to be
clamped at virtually any angle or orientation to the edge of a workpiece.
Great in situations where the project is already assembled and in need of
an extra pocket hole or in repair applications such as tightening a chair or
table rail to the leg.
The Mini Kreg Jig
®
comes in handy in
repair applications and space constrained
areas. One of the most popular uses of
the jig is to tighten a wobbly chair or
table leg as shown in the images at right
without having to spend time re-gluing,
clamping, etc.
Plug Setting Feature
The Mini Kreg Jig
®
features a recess on
the bottom of the tool that is helpful in
seating pocket hole plugs. Simply start
the plug into the pocket hole and push
into position with the base of the tool.
Saves wear and tear on your hands!
Setting up the Mini Kreg Jig®
drill guide
base of jig
chip ejection
hole
Setting a plug with the
Mini Kreg Jig®
TIP
Figure
(18)
1313
1313
13
To Next Page
Loading...