_________________________________________________________________________________________
Kreyer – Picture guide to installation and start-up Chilly (page 12 of 18) v.11-2015
NOTE:
Please close the lid of the Chilly unit when you have finished the installation.
The unit should operate when the lid is closed for proper transfer of cold air from the fan
into the condenser.
By open lid, the air sucked into the unit is drawn from the warm ambience all around the unit, and not only through
the fan which cools it properly on the way to the condenser. This may cause in some cases a stop due high-
pressure, and may reduce significantly the cooling capacity of the unit, so low temperatures may not be reached
as set.
Keep lid closed while the unit is in operation!
To Next Page
Loading...
