Need help?Do you have a question about the KREYER CHILLY MAX and is the answer not in the manual?
Covers general safety information, safe operation practices, and user/operator safety guidelines.
Addresses personnel qualifications, risks of non-compliance, maintenance safety, and spare parts.
Details prohibited operations, refrigerant risks, and the meaning of safety symbols.
Provides guidelines for packaging, handling, liability, methods, orientation, and hoisting precautions.
Specifies installation requirements, ambient conditions, clearances, and floor space for proper setup.
Details various options for air intake and exhaust configurations, including ducting requirements.
Guides on correct electrical connection and hydraulic piping, including pump priming procedures.
Instructions for refilling the water tank, emphasizing water quality and pump priming.
Step-by-step instructions for safely starting up the chiller after installation.
General maintenance advice, fluid cleanliness checks, and procedures for draining the tank.
Guidance on refilling fluid, water supply considerations, and preparing for prolonged periods of inactivity.
Procedures for cleaning the air-cooled condenser and replacing the air filter for optimal performance.
An introduction to diagnosing faults and handling error messages displayed on the unit.
Diagnoses and provides repair steps for common faults like compressor cutout and pressure switch trips.
Addresses faults like overload, flow switch issues, thermostat problems, and unit startup failures.
Resolves faults related to high fluid temperatures and excessive consumer capacity.
Explains the importance of water quality, types, and key parameters for chiller operation.
Provides guidance on water treatment and lists contact details for technical assistance.
Details the methods and agents for cleaning both soldered and screwed plate heat exchangers.
Outlines safe and compliant procedures for disposing of refrigerant and chiller components.
Provides essential technical data related to electrical connections and power supply.
Illustrates the main electrical circuit diagram for power distribution to components.
Details the electrical schematics for the control circuits of the chiller.
Shows the physical layout and component arrangement within the electrical switch box.
Lists all components used in the electrical system with their part numbers.
To Next Page
General
