EasyManua.ls Logo

KREYER CHILLY MAX - Fluid Refilling and System Standstill; Condenser Cleaning and Filter Replacement

KREYER CHILLY MAX
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Instructions 11
4 CARE AND MAINTENANCE
General
In case of irregularities occurring during operation or extraordinary noise, the chiller has to be switched
off by means of the control or main switch.(please contact the manufacturer)
Fluid (water)
Cleanliness of the water/fl uid should be tested daily. If required, the water/fl uid has to be drained and
the evaporator, tank and pump has to be rinsed or cleaned. Dedending on the grade of dirt on the
evaporators,the future cleaning cycles will be determined.
Drain water from the tank as follows:
Solve the advance for emptying the tank
Option - Turn the water level sight glass (pipe) to the side
(A)
Option - drain water through water drain valve (B)
(A)
Water level tube Water
drain valve
Water level tube
Water level tube
(B)

Related product manuals