Operating Instructions 1
OPERATING INSTRUCTIONS
1 SAFETY / PREVENTION OF ACCIDENTS 2
2 TRANSPORT 4
3 INSTALLATION AND INITIAL OPERATION 5
4 CARE AND MAINTENANCE 11
5 FAULT DIAGNOSIS 13
6 IMPORTANT INFORMATION
ON WATER QUALITY 17
7 PLATE HEAT EXCHANGER (OPTION) 19
8 WASTE DISPOSAL 19
APPENDIX
- TECHNICAL DATA
- TEMPERATURE CONTROLLER
- WIRING DIAGRAM
These operating instructions have to be read carefully before putting the
chiller into operation.
Please observe these instructions, otherwise the manufacturers liability for subsequent damage will be
cancelled. All rights required for further technical development and modifi cation, are reserved.
Proper use of the chiller
This chiller is designed for the cooling of water only. For the use of other agents (e.g. deionised water)
please contact the manufacturer. Limits indicated in the technical data must be adhered to strictly, otherwise
the manufacturers liability for subsequent damage will be cancelled. Chilling of fl ammable or explosive
substances is prohibited.
Please keep these operating instructions
for further use!
IMPORTANT!
IMPORTANT!
To Next Page
Loading...
