_________________________________________________________________________________________
Kreyer – Picture guide to installation and start-up Chilly (page 18 of 18) v.11-2015
Your Chilly is now ready to cool your tanks!
If you have Chilly 400V / 3 phase – (Chilly 350, Chilly 450) –
Please check the unit manual for the correct electrical connection.
In case of technical questions or problems please always indicate the machine
type and its serial number - see green box in the picture above! You will find
this information on the type plate mounted on the outer side of each
machine.
It is recommended to save this manual and the operation manual of your unit
within reach and to keep another copy in your office as back-up.
For questions and assistance please contact your local Chilly provider or
contact us at KREYER Germany:
To Previous Page
Loading...
