KRHÜNER 60001 - Maintenance and Cleaning

3. MAINTENANCE & CLEANING
CLEANING
• Before cleaning, always switch o the appliance, disconnect the appliance and let
it cool down.
• Clean the outside with a sponge or slightly wet linen.
• Do not use abrasive cleaners, gring, or metal brush or another cung object.
• The greasy dirt of the fan fuselage and the fan blade should be cleaned.
• Do not clean the fan with water directly.
• Do not wipe with acid detergent, lamp oil, alcohol or chemical cloth in case the co-
lour has changed or deteriorated.
STORING
If the fan is going to be stored for an extended period of me or it is not going to be
used regularly, place it in the original packaging (or similar) and store it in a dry and clean
place. Before using again, check if the unit is clean and dry and if the fan blades can rotate
freely.
Speeds
Push down the buon to start
waving
Pull up the buon to stop
waving
To up and down the
angle