Krick 20310 - Page 24

Page 24 © Klaus Krick Modelltechnik Knittlingen August 2002
Part
no.
Description reqd.
for
dive
model
reqd.
for
display
model
Qty. Material contained
in basic
set
20310
contained
in dive
set
20311
95 Cover fastening screws x 4 Cylinder screw
M3 x 10 mm
x
96 Gun, tower, barrel x x 1 Metal casting x
97 Gun, tower, joint x x 1 Metal casting x
98 Gun, Tower, plinth x x 1 Metal casting x
99 Gun, Tower, hand wheel x x 1 Plastic x
100 Gun, Tower, magazine x x 1 Metal casting x
101 Gun, bow, barrel x x 1 Metal casting x
102 Gun, bow, housing x x 1 Metal casting x
103 Gun, bow, ring x x 1 Metal casting x
104 Gun. bow, plinth x x 2 Plastic x
105 Gun, bow, visor x x 1 Metal casting x
106 Gun, bow, hand wheel x x 2 Metal casting x
107 Gun, bow, double barrel x x 1 Metal casting x
108 Gun, bow, axle x x 1 Brass wire 2x10 mm x
A Drive battery x 1 12 Volt NiCd not included
E Receiver x 1 Min. 4 channel, not
included
A-E Receiver battery x 1 not included
R-M Drive controller for motors x 1 30A, not included
R-P Controller/switch for pump x 1 not included
S Servo x 2 not included
P Pump, see part 57