21
Specifications
Configuration Front loaded, vented subwoofer
System type Active subwoofer
Drivers (Transducers) 12” high excursion woven Kevlar cone woofer with 3” voice coil
Frequency Response (+/- 3dB) 29Hz – 60Hz to 160Hz (L&R inputs)
29Hz – 211Hz (LFE input)
Frequency Response (-10dB) 25.6Hz
Calculated Max SPL 120 dB
Amplifier Type Class A-B
Power Output 400 Watts (RMS)
THD+N 0.01%
Input Impedance (Ohms) 10kOhm Balanced
SNR 92dB
Enclosure Construction Reinforced MDF
Finish High Gloss Paint
Grille N/A
Hardware Rubber feet, Spiked feed. KFS-1 Footswitch and ¼” TRS cable
Cabinet Dimensions (H x W x D) 20.0” x 20.0” x 22.48”
(508mm x 508mm x 571mm)
Net Weight (each) 109.7 lbs. (49.7 kgs)
Fuse Type 110V-120V~T10AL/250V 50Hz/60Hz (5mm x 20mm)
220V-240V~T5.0AL/250V 50Hz/60Hz (5mm x 20mm)
To Next Page
Loading...
