Krober aeroplus E - Page 25

aeroplus E
Taking into service
25
8 Plug the FireSafe check-valve in
oxygen flow direction into the nasal
cannula.
ATTENTION!
Observe flow direction indicated by the
arrow!
ATTENTION!
For the best protection of the patient,
place the FireSafe check-valve in the
oxygen tubing routing as close to the
patient as possible!
9 Connect the other terminal to the
short oxygen tubing (0.33 m).
10 Completely assembled system
with:
a. Oxygen concentrator
b. 0.33 m O2 safety hose
c. Holder for humidifier
d. Mounting strips
e. Humidifier
f. 15 m O2 safety hose
g. Firesafe check valve
h. 2 m O2 nasal cannula
i. Mains connection cable
Nasal cannula
0.33 m O2 safety hose