Kröber O2 - Kröber O2 Vers. 4.0
The flow of the gas to the nasal cannula should be heard or felt in order to check the
function of the device. Move your hand back and forth in front of the nasal cannula. If
no gas flows, the connections of the nasal cannula must be checked for leaks.
ATTENTION!
The unit has been designed for operation at altitudes of up to 2000 m above sea
level. If the unit is used beyond this specification, compliance with the specified
performance data can no longer be guaranteed.
8.3 Taking the device out of operation - Switching it off
1 Press the power switch (1) on the top of
the KröberO2 to turn it off.
- The Kröber O2 stops the oxygen
production process and the
compressor.
NOTE!
Oxygen can continue to flow despite
the unit being switched off.
2 Take off your nasal cannula.
Remove the water from the humidifier if
it has not been used for a long time.
To Next Page
Loading...
