Need help?Do you have a question about the KROHNE LT40 F and is the answer not in the manual?
General| Type | Level Transmitter |
|---|---|
| Application | Liquids and slurries |
| Process Temperature | -40…+150°C / -40…+302°F |
| Process Pressure | -1…40 barg / -14.5…580 psig |
| Accuracy | ±2 mm |
| Output | 4-20 mA HART |
| Power Supply | 12-30 V DC |
| Housing Material | Aluminium |
| Process Connection | Flanged |
| Approvals | ATEX, IECEx, FM, CSA |
Defines document scope and provides a basic description of the device.
Lists relevant standards and approvals for the device's hazardous area certification.
Details device categories (Ex ia, Ex db) and explains nameplate markings.
Covers general safety notes, special conditions, and electrostatic discharge warnings during installation.
Specifies ambient and service temperature ranges and limits for safe operation.
Provides maximum process and ambient temperature limits for LT40 C based on temperature class.
Provides maximum process and ambient temperature limits for LT40 F based on temperature class.
Outlines essential safety warnings and recommendations for electrical wiring.
Details terminal compartment operations and tightening capacity.
Covers requirements for connecting the device to the equipotential bonding system for safety.
Lists maximum intrinsically safe values for Ex i circuits and connection guidelines.
Provides wiring instructions for Ex d versions and relevant electrical data.
Details crucial safety checks required before supplying electrical power to the device.
Covers periodic maintenance, cleaning procedures, and safety precautions for repairs.
Explains how to remove the device and replace specific transmitter versions.
Provides manufacturer details and instructions for returning the device for service.
Offers a form to certify the safety of a returned device for handling.
To Next Page
