continues in next page »
Functions and modes
∆ Mode Switch
Move the switch to D-pad position to set the device to D-pad mode.
Move the switch to Joystick position to set the device to analog mode.
∆ TURBO set up & removal
1. Turbo Buttons. The buttons that admit the TURBO function: /A, /B, /X, /Y, L1/LB, R1/RB,
L2/LT, R2/RT.
2. Set up TURBO. Press and hold on TURBO plus the Turbo button you wish to appoint.
The LED will blink with a red light when pressing a button that has been assigned as turbo.
3. Remove TURBO. Press and hold on the TURBO plus the Turbo button.
∆ MACRO set up
1. Press MACRO, the LED will turn on with a green light.
D-PAD JOYSTICK
INDEX
Technical Specifications
Button’s function table
Functions and modes
∆ Mode switch
∆ TURBO set up & removal
∆ MACRO set up
∆ MACRO removal
Installation
To Next Page
Loading...
