Do you have a question about the Krone AM 243 S and is the answer not in the manual?
Brand | Krone |
---|---|
Model | AM 243 S |
Category | Lawn Mower |
Language | English |
Specifies requirements for machine operators regarding knowledge and training.
Outlines risks and consequences of not following safety instructions.
Adherence to safety rules, accident prevention, and emergency preparedness.
Lists general safety rules and accident prevention regulations for machine operation.
Safety guidelines for operating the PTO shaft, including guards and speed.
General safety rules for maintenance, including engine shutdown and safety distances.
Safety distances and precautions when operating near power lines.
Critical safety warnings for repair, maintenance, cleaning, and assembly.
Safety instructions for connecting and operating the hydraulic system.
Warnings about hydraulic oil, leaks, and proper connection procedures.
Instructions for connecting lines, avoiding interchange, and system soiling.
Safety warnings for rotating PTO shafts and incorrect speed settings.
DANGER warning for installing compensation springs for specific models.
Accident warnings for transport travel on roads, including regulations and lifting.
Procedure for converting mower to transport mode with safety warnings.
Procedure for lowering the unit to working position with safety checks.
Ensures the locking mechanism is fully down for safety during operation.
Essential checks and safety measures before starting mowing operations.
Guidelines for operating the mower, including glide skids and safety distances.
Safety precautions and steps for safely detaching the mower from the tractor.
Warnings about adjusting compensation springs in working position.
Adjusting compensation springs for ground pressure and sward protection.
General safety warnings for all maintenance, repair, and cleaning tasks.
Safety precautions for performing a test run after maintenance or repair.
Procedure and intervals for checking and changing oil in gearboxes.
Instructions for checking the oil level in the cutter bar.
Safety warnings for rotating discs and blades coming loose during changes.