Need help?Do you have a question about the Krone EasyCut F 320 and is the answer not in the manual?
General| Brand | Krone |
|---|---|
| Model | EasyCut F 320 |
| Category | Lawn Mower |
| Language | English |
Explains manual structure, terms, icons, references, and conversion table.
Details warning signs, signal words, and property damage warnings.
Defines proper use, limitations, and general safety instructions.
Addresses danger zones, technical limits, and risks during operation.
Covers PPE, safety devices, markings, and emergency response.
Covers machine shutdown, securing, road safety, and parking.
Identifies main components of the mower with numbered labels.
Details the intermediate universal shaft and its friction clutch.
Lists dimensions, tractor requirements, and operating parameters.
Details oil specifications, filling quantities, and mixing warnings.
Comprehensive checklist for preparing the machine for first use.
Procedures for preparing the mower, adapting coupling points, and connecting.
Adapting universal shaft and checking front end dimension.
Steps for preparing the tractor and connecting the machine.
Procedures for parallel lifting, hose connection, and basic mower settings.
Guidance on safely installing the universal shaft and checking front end dimension.
Procedures for operating front and side safety devices and guards.
Steps and tips for effective mowing, including float position and relief.
Warnings and procedures for safe driving and transport of the machine.
Steps to secure the machine for safe transport on roads.
Procedure for safely detaching and storing the mower after use.
Adjusting the mower's cutting height using the top link.
Adjusting ground pressure and setting high-cut skids.
Schedule for maintenance tasks based on operating hours.
Specifies torque values and procedure for venting the friction clutch.
Inspection and replacement of guard cloths for damage.
Safety precautions regarding hydraulic hoses and oil disposal.
Procedures for checking and changing oil in main and mower gearboxes.
Instructions for checking oil level and changing oil in the cutterbar.
Information on rotary hubs, shear pins, and replacing protection.
Procedures for checking blade wear, changing blades, and disc/drum inspection.
Inspecting and replacing blade carriers and cutterbar impact stops.
Procedure for lubricating the universally-jointed drive shaft.
Details lubrication points, types, and intervals for the machine.
Guidelines for proper storage, including cleaning and rust prevention.
Instructions for disposing of machine components and fluids.
Alphabetical listing of topics and their page numbers for quick reference.
Manufacturer's declaration regarding compliance with EC directives.
To Next Page