EasyManuals Logo

Krone EasyCut F 320 User Manual

Krone EasyCut F 320
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
2 Safety
2.3 Basic safety instructions
22 Original Operating Instructions 150000802_00_en
Raised machine and machine parts
The raised machine and machine parts may fall or tilt unintentionally. People may be seriously
injured or killed, as a result.
Do not stay under the raised machine or machine parts which are not safely supported, refer
to page23.
Prior to all work on raised machines or machine parts, lower the machine or machine parts.
Before performing any work under raised machines or machine parts, secure the machine or
machine parts with rigid safety support or with hydraulic shut-off device or by supporting
against lowering.
Danger associated with welding work
Improper welding work endangers the operational safety of the machine. Thus there is a risk of
accidents, serious injuries or death.
Never perform welding work on the following parts:
Gearboxes
Parts of hydraulics
Parts of electronics
Frame or supporting components
Before carrying out welding work on the machine, obtain approval by KRONE customer
service and let you show alternatives, if necessary.
Before performing welding work on the machine, park the machine safely and disconnect it
from the tractor.
Welding work must only be performed by experienced qualified personnel.
Attach the earthing of the welding device near the welding points.
Caution when performing welding work near electric and hydraulic parts, plastic parts and
pressure accumulators. The parts may be damaged, endanger people or cause accidents.
2.3.19 Behaviour in dangerous situations and in case of accidents
Any measures not taken or incorrect measures in dangerous situations can make it difficult or
impossible to rescue exposed persons. Due to the impeded conditions of rescue, the chances
to help and heal injured people deteriorate.
As a matter of principle: Park the machine.
Get an overview of the existing danger and identify the reason.
Secure the accident site.
Save persons from the danger zone.
Leave danger zone and do not enter it again.
Alarm rescue workers and seek help, if possible.
Carry out immediate lifesaving actions.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Krone EasyCut F 320 and is the answer not in the manual?

Krone EasyCut F 320 Specifications

General IconGeneral
BrandKrone
ModelEasyCut F 320
CategoryLawn Mower
LanguageEnglish

Related product manuals