Krone EasyCut F 320 - Basic Setting of Mower

7 Start-up
7.7 Basic setting of mower
42 Original Operating Instructions 150000802_00_en
7.7 Basic setting of mower
KM000-517
 Lower the mower to the ground.
 Move the single-acting control unit(1+) into the float position.
 Using the lower links, position the arrow(1) in the centre of the hydraulic cylinder(2).
 Lift and lower the mower again using the single-acting control unit(1+). Check position of
the arrow mark and correct again if required.