Maintenance - Gearbox 13
Main gearbox 13.1
Original Operating Instructions 150000802_00_en 61
13 Maintenance - Gearbox
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
To avoid accidents, the relevant safety instructions must be read and observed, refer to
page12.
WARNING
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
The safety routines must be read and observed to avoid accidents, refer to page23.
13.1 Main gearbox
KMG000-005
Observe the safety routine “Safely performing oil level check, oil change and filter element
change”, refer to page24.
INFORMATION
The oil level must be checked and the oil must be changed in working position and with
machine in horizontal position.
Loosen the supporting chain(s) (5).
Remove the intermediate universal shaft(s) from the main gearbox.
Dismount the guard (4).
To Next Page
Loading...
