Driving and Transport 9
Preparing machine for road travel 9.1
Original Operating Instructions 150000802_00_en 49
9.1 Preparing machine for road travel
KMG000-057
ü All points listed in the chapter "Start-up" have been fulfilled, refer to page38.
ü The machine is shut down and safeguarded, refer to page23.
ü The support jack has been pushed in, refer to page46.
ü The universal shaft has been installed, refer to page40.
ü The mower was lifted into the transport position via the single-acting control unit(1+), refer
to page46.
ü The stop cock on the hydraulic hose(1+) is closed.
ü The front hydraulics have been blocked, e.g. via a stop cock.
To Next Page
Loading...
