8 Operation
8.3 Support jack
46 Original Operating Instructions 150000802_00_en
8.3 Support jack
8.3.1 Inserting support jack (transport position)
KMG000-065
Raise the machine via front hydraulics until the support jack (2) can be inserted.
Shut down and safeguard the machine, refer to page23.
Pull the tension bar (1), insert the support jack (2) and lock it with the tension bar (1).
8.3.2 Lowering support jack (parking position)
KMG000-064
Raise the machine via front hydraulics until the support jack (2) can be lowered.
Shut down and safeguard the machine, refer to page23.
Pull the tension bar (1), lower the support jack (2) and lock it with the tension bar (1).
8.4 Lowering machine from transport position to working position
ü The stop cock on the hydraulic hose(1+) is open.
Move the single-acting control unit(1+) into the float position until the mower has been
lowered into the working position.
Move the control unit (1+) into the float position for mowing.
8.5 Raising machine from working position to transport position
Actuate the control unit(1+) until the mower is lifted into the transport position.
To Next Page
Loading...
