Need help?Do you have a question about the Krone KW 7.70/6x7 and is the answer not in the manual?
General| Type | Rotary Tedder |
|---|---|
| Working width | 7.70 m |
| Number of rotors | 6 |
| Number of arms per rotor | 7 |
| Number of Tines per Rotor | 2 |
| Transport Width | 2.98 m |
| Rotor Diameter | 1.50 m |
| Working Speed | 15 km/h |
Defines correct usage and manufacturer's responsibility for the rotary tedder.
Outlines essential safety rules and accident prevention measures for machine operation.
Details the location and meaning of warning labels for safety.
Identifies the placement of important general information labels on the machine.
Provides key specifications and measurements for the rotary tedder models.
Critical safety precautions before and during machine use.
Covers initial setup steps involving the tractor and the tedder.
Explains the procedure for connecting the tedder to the tractor's linkage.
Guides on how to correctly set the length of the PTO shaft for safe operation.
Details the installation and checking of lighting and protective elements.
Step-by-step instructions for unfolding the tedder for operation.
Step-by-step instructions for folding the tedder for transport.
Describes the process of safely detaching the tedder from the tractor.
Emphasizes safety precautions required before making any adjustments.
Explains how to adjust the spreading angle based on crop and ground conditions.
Advises on selecting appropriate PTO and travel speeds for optimal tedding.
Details how to adjust disc height for different ground unevenness.
Describes the adjustment of the edge spreading function.
Instructions on adjusting stabilizers to prevent machine wobble.
Details the procedure for aligning and adjusting the tines for proper function.
Critical safety guidelines for all maintenance and repair tasks.
Covers routine checks, cleaning, greasing, and bolt tightening.
Information regarding the hydraulic system's maintenance and hose replacement.
Notes on the main gearbox, which requires no maintenance.
Guidelines for tyre repair, handling, and air pressure checks.
Illustrates and specifies lubrication intervals for various machine components.
Safety precautions to follow before and during machine storage.
Steps for cleaning, greasing, and storing the tedder properly.
Instructions for mounting the optional night swathing gearbox.
Details on fitting an extra mechanism to prevent tine loss.
Information on mounting wheel guards for protection.
Guidance on installing a permanent lighting system on the machine.
Critical safety warnings related to assembly procedures.
Initial steps and prerequisites before commencing assembly.
Instructions for correctly attaching the undercarriage wheels.
Details on how to attach the disc arms with tines to the disc plates.
Procedures for installing various protective frames on the machine.
Instructions for fitting the warning signs to the protective frames.
To Next Page