Krone KWT 7.82/6x7 - User Manual

To Next Page

Original operating instructions

Rotary tedder

KWT 7.82/6x7

KWT 8.82/8

KWT 11.22/10

(from serial no.: 803 269)

Order no.: 150 000 104 04 en

01.04.2013

Main Page

Table of Contents3
Foreword6
Introduction7
Purpose of Use7
Validity7
Identification Plate7
Information Required for Questions and Orders8
Intended Use8
Technical Data9
Safety10
Introduction10
Re-Ordering the Adhesive Safety and Information Labels11
Affixing the Adhesive Safety and Information Labels11
Contact11
Position of the Adhesive Safety Stickers on the Machine12
Identifying Symbols in the Operating Instructions14
Identification of the Hazard Warnings14
Personnel Qualification and Training15
Dangers in Case of Non-Compliance with the Safety Instructions15
Safety-Conscious Work Practices15
Safety Instructions and Accident Prevention Regulations16
Hitched Implements17
PTO Operation18
Hydraulic System19
Tyres19
Maintenance20
Unauthorised Conversion/Modification and Spare Parts Production21
Inadmissible Modes of Operation21
Safety Instructions on the Machine21
Commissioning22
General23
First Installation23
Preparations on the Rotary Tedder23
Removing the Preserving Wax from the Tines23
Assembling the Support for Switching Hydraulics on the Tractor24
Preparations on Tractor25
Adjusting the Lower Suspension Arms25
Mounting Onto the Tractor26
PTO Shaft27
Length Adjustment27
Start-Up28
Mounting Onto the Tractor28
Install the PTO Shaft29
Hydraulics31
Special Safety Instructions31
Connecting the Hydraulic Lines31
Lighting Connection34
Driving and Transport35
Preparation for Transport36
Mounting the Safety Chain to the Tractor38
Install Safety Chain on the Machine38
Operation39
Overload Protection39
From Transport into Working Position40
Working Depth of the Rotor Tines43
Using the Machine for Work44
Exchanging the Wheels46
Travelling on an Incline46
Switching from Working Position to Transport Position47
Parking49
Settings51
Spread Limiter55
Setting of Tines56
Setting for the Pendulum Area of the Bars56
Adjusting the Bar Hinge Point Inside to the Intermediate Bar57
Setting the Linking Rod60
Setting the Tension Spring on the Linking Rod61
Setting the Transport Interlocks62
Maintenance63
Special Safety Instructions63
Test Run63
Special Tightening Torques MA (Nm)64
Tightening Torques65
Tightening Torques (Countersunk Screws)66
Maintenance Hydraulics67
Setting of Running Gear Enabling67
Hydraulic Circuit Diagram68
Tyres70
Checking and Maintaining Tyres71
Tyre Air Pressure71
Maintenance - Lubrication Chart72
Special Safety Instructions72
PTO Shaft72
Lubrication Chart73
Maintenance - Gearbox74
Filling Quantities and Lubrication Designations for Gearboxes74
Special Equipment75
Tine Loss Safeguard75
Spare Wheel with Support76
Jockey Wheel Front77
Anti-Wrap Guard Plate Tyres78
Placing in Storage79
Special Safety Instructions79
At the End of the Harvest Season80
Before the Start of the New Season81
Special Safety Instructions81
Index82

Need help?

Do you have a question about the Krone KWT 7.82/6x7 and is the answer not in the manual?

Krone KWT 7.82/6x7 Specifications

General

Brand	Krone
Model	KWT 7.82/6x7
Category	Farm Equipment
Language	English

Related product manuals

Krone Round Pack 1250

136 pages

Krone Big Pack 890 XC

612 pages

Krone EasyCut F 320 CV

118 pages

Krone Big Pack 1290 HDP

612 pages

Krone KWT 7.82/6x7 - User Manual

Table of Contents

Krone KWT 7.82/6x7 Specifications

Related product manuals