To Next PageTo Next Page
Need help?Do you have a question about the Krone Swadro 807 and is the answer not in the manual?
General| Brand | Krone |
|---|---|
| Model | Swadro 807 |
| Category | Farm Equipment |
| Language | English |
Manufacturer, product name, and compliance information.
Welcome message and product introduction.
Refers to the rotary rake as "machine" in instructions.
Instructions are part of the machine; training required.
Defines the rotary rake's function and attachment.
Specifies applicable machine series.
Details location and purpose of the machine's identification plate.
Lists essential data for inquiries and spare parts.
Emphasizes not altering the identification plate.
Advises using authentic KRONE parts for safety.
Defines the machine's exclusive use in agricultural work.
Notes that information corresponds to publication date, reserves right to changes.
Table detailing technical specifications for Swadro 807.
Table detailing technical specifications for Swadro 809 and 810.
Table detailing technical specifications for Swadro 907.
Explains safety devices, hazards, and warning pictograms.
Defines DANGER, WARNING, and CAUTION levels and their effects.
Information on how to obtain replacement safety and information labels.
Instructions on proper surface preparation for label adhesion.
KRONE GmbH contact details for inquiries and support.
Illustrates the location of adhesive safety stickers on the machine.
Details the meaning and order numbers of various safety warning pictograms.
Illustrates the location of general information labels on the machine.
Explains symbols used to denote safety instructions in the manual.
Repeats definitions for DANGER, WARNING, and CAUTION hazard levels.
Specifies requirements for machine operators and maintenance personnel.
Outlines consequences of not following safety instructions.
General advice for safe working procedures and emergency preparedness.
Lists 25 key safety and accident prevention regulations for safe operation.
Provides safety guidelines for hitching implements to the tractor.
Details safety precautions for operating the Power Take-Off shaft.
Safety measures when working with the hydraulic system and hoses.
Precautions regarding tyre fitting, pressure, and maintenance.
General safety rules to follow during maintenance, repair, and cleaning.
Safety distances and precautions when operating near power transmission lines.
Guidelines on machine modifications and use of spare parts.
Defines prohibited operating modes and limit values.
Explains the purpose and importance of on-machine safety instructions.
Hazards associated with improper machine assembly.
Risks from unintended machine movements during setup.
Refers to separate "Assembly Instructions" for initial setup.
General preparations required on the tractor.
Instructions for setting the tractor's lower suspension arms.
Procedure for adjusting the PTO shaft length.
Setting the correct height for tractor lower suspension arms.
Safety warnings during machine assembly or disassembly.
Procedures for attaching the machine to the tractor.
Hazards related to tractor support and hitching load limits.
Important safety warnings for connecting hydraulic lines.
Precautions to prevent contamination of the hydraulic system.
Detailed instructions on connecting hydraulic hoses for different models.
Steps for connecting the machine's lighting system to the tractor.
How to connect the machine's electrical controls to the tractor.
Critical safety warnings for PTO shaft installation and handling.
Step-by-step guide for installing the PTO shaft.
Instructions for safely lifting and securing the machine.
Safety rules for road travel, including hitching and visibility.
Hazards during road travel related to width settings and locks.
Procedures for securing the machine for transport.
Prohibition against driving in reverse during work.
Explanation of star ratchet couplings for overload protection.
Safety warnings when lowering the machine into working position.
Steps to remove and store tine protections.
Procedure for lowering the rotor arms into working position.
How to adjust the rear swath cloth for optimal swathing.
Adjusting the swath former's longitudinal position.
Adjusting the vertical height of the swath former.
How to adjust the front swath cloth height.
Procedure for adjusting the rear swath cloth on the Swadro 907.
Safety warnings related to the swath former.
Adjusting the swath former's longitudinal position.
Adjusting the vertical height of the swath former.
Safety warnings during swiveling of tine arms.
Steps to move tine arms from transport to working position.
Procedures for handling collapsible tine arms.
Safety warning about crush hazards when moving hoop guards.
Steps to move hoop guards into the working position.
How to adjust raking height using a hand crank.
Safety warnings for electrically adjusting raking height.
Explanation of control unit switches for raking height adjustment.
Further details on adjusting raking height using controls.
Hazards and precautions when travelling on inclines.
Guidelines for optimal travelling and drive speeds.
Safety warnings when switching to transport position.
Precautions before swiveling mowing unit to transport position.
Steps to move hoop guards into transport position.
Safety warnings when swiveling tine arms to transport position.
Procedure for swiveling rigid tine arms to transport.
Procedure for swiveling collapsible tine arms to transport.
Safety warning about not turning on drive while adjusting swath cloth.
Steps to push swath cloth into transport position for specific models.
Safety warnings during swath cloth adjustment.
Steps to push swath cloth into transport position for Swadro 907.
Procedure for raising rotor arms to transport position.
Instructions for fitting tine guards for transport or parking.
Safety warnings when switching swath types.
Procedure to change from one side swath to two individual swaths.
Procedure to change from two individual swaths to one side swath.
Safety warnings when parking the machine.
Detailed steps for safely parking the machine.
How to adjust transverse and longitudinal inclination of rotors.
Safety warning regarding working under raised rotors.
Adjusting suspension arms for centered operation.
Safety warnings when adjusting throttles.
How to adjust throttles for rotor lowering speeds.
General safety rules for performing maintenance work.
Safety precautions when handling compensation springs.
Warnings about using non-approved spare parts.
Table of recommended tightening torques for various bolt sizes.
Torque values for countersunk screws.
Procedure for retightening tine screws after initial use.
Hazards and advice for correct tyre fitting and maintenance.
Steps for checking and maintaining tyres, including wheel nuts.
Recommended torque values for wheel nuts.
Table of tyre pressures for different tyre identifications.
Procedure for replacing tine arms on specific models.
Further steps and safety for tine arm replacement, including gluing.
Warning to check rotor movement after tine arm installation.
Procedure for replacing tine arms on the Swadro 907.
Further steps and safety for tine arm replacement on Swadro 907.
Warning to check rotor smoothness after tine arm installation.
General safety precautions for lubrication tasks.
Lubrication intervals for PTO shafts for different models.
Explains that lubrication points are shown on one side only.
Visual guide to lubrication points for specific models.
Visual guide to lubrication points for the Swadro 907.
Safety warnings and procedures for dealing with leaking hydraulic lines.
Information on hydraulic hose ageing and replacement requirements.
Table of gearbox filling quantities and lubricant types.
Notes that the rotor gear and housing are maintenance-free.
Instructions for changing oil in gearboxes.
Reminder for correct disposal of used oil.
Safety warnings during installation of special equipment.
Instructions for mounting the tine loss safeguard.
Instructions for attaching chains to restrict suspension arm height.
General safety rules for storage procedures.
Procedures for cleaning and preparing the machine for storage.
Safety advice for placing the machine on blocks.
Checks and preparations before starting a new season.
Recommendation to use vegetable oils and greases.
General safety rules for addressing malfunctions.
Lists common malfunctions, their causes, and remedies.
Mentions that the circuit diagram is in the Appendix.
