Need help?Do you have a question about the Krone Swadro 700 and is the answer not in the manual?
General| Working Width | 6.80 m |
|---|---|
| Number of Rotors | 2 |
| Transport Height | 3.99 m |
| Tine Arms per Rotor | 4 |
| Working Depth | Adjustable |
| Required Hydraulic Connections | 1 x single-acting |
Defines the intended application of the rotary swather for agricultural work.
Lists technical details and measurements of the swather models.
Provides contact and location details for the manufacturer.
Details on the machine's identification plate and its importance.
Information needed for parts ordering and inquiries.
Comprehensive technical specifications including dimensions and capacities.
Explains how safety instructions are marked with danger signs.
General safety rules, personnel qualifications, and specific hazard guidelines for safe operation.
Illustrates and describes safety labels and their locations on the machine.
Details the placement and meaning of general information signs on the machine.
Critical safety precautions to be followed before operating the swather.
Steps to prepare the tractor, hitch, and attach the swather safely.
Procedures for connecting hydraulic systems, lighting, and optional electric control unit.
Procedure for securely connecting the PTO shaft to the tractor and implement.
Safety and procedures for preparing and transporting the swather on public roads.
Instructions on how to safely attach the swather to the tractor.
Explains the overload protection mechanism and how to react to overloading.
Steps to change the swather from transport to working mode, including rotor arm lowering.
Procedure for folding the tine arms into their working configuration.
Positioning guard bars and controlling swather disks separately for operation.
Steps to change the swather from working to transport mode, including tine arm folding.
How to secure tine tips and safety advice for operating on slopes.
Instructions for safely detaching the swather from the tractor.
Setting the correct height for the tractor's lower link arms.
Adjusting the working depth using crank handles for optimal harvesting.
Adjusting the working width of the swather disks via electrical or mechanical means.
Adjusting the chassis's lateral inclination for optimal working results.
How to adjust the running gear's direction of travel for straight movement.
Guidance on setting appropriate travel speeds and PTO RPM based on conditions.
Essential safety rules to follow during maintenance and repair work.
Overview of regular maintenance activities like cleaning, greasing, and lubrication.
Guidelines for tyre installation, maintenance, and air pressure.
Procedure for checking and tightening wheel nuts.
Step-by-step instructions for replacing individual tine arms.
Information on replacing hydraulic hose lines due to aging and wear.
Instructions for lubricating the universal drive shaft at specified intervals.
Details on lubrication for swather disk gearbox and housing.
Visual guide showing all lubrication points and their intervals.
Instructions for mounting the accessory to prevent tine loss.
Guide for attaching the accessory to limit lower link arm depth.
Comprehensive steps for cleaning, greasing, and preparing the swather for winter.
Steps to take when starting the swather after a period of storage.
General safety rules applicable to all maintenance, repair, and adjustment work.
Common faults, their possible causes, and recommended remedies for the swather.
Essential preparations and safety checks before assembly work.
Procedure for changing the wheels to their outer position for operation.
Detailed steps for mounting the swath rubber component.
Instructions for fixing the warning signs unit to the chassis.
Steps to install the lighting system and check its function.
To Next Page