Need help?Do you have a question about the Krone Swadro TC 760 and is the answer not in the manual?
General| Transport Width | 2.99 m |
|---|---|
| Transport Height | 3.99 m |
| Tine Arms per Rotor | 4 |
| Number of Rotors | 2 |
| Rotor Diameter | 3.3 m |
| Working Width | 7.6 m |
Covers fundamental safety guidelines, personnel qualification, and hazard awareness.
Addresses safe workstations, passengers, and operational safety through machine condition.
Highlights critical safety parts, handling damage, and technical limit values.
Defines hazardous areas around the machine and specifies required safety distances.
Details risks associated with tractor/machine proximity, drives, PTO, and universal shafts.
Emphasizes maintaining safety devices and using personal protective equipment correctly.
Covers machine safety signs and important considerations for safe road and field driving.
Provides guidelines for safe parking and handling of operating materials with environmental care.
Details dangers from noise, liquids under pressure, hot liquids, and toxic exhaust gases.
Addresses dangers during work on the machine, including maintenance and repairs.
Covers hazards during wheel/tyre work and procedures for hazardous situations and accidents.
Details critical steps for safely shutting down and securing the machine to prevent movement.
Outlines safe methods for supporting raised components to prevent falls and injuries.
Details safe procedures for oil checks and changes to maintain operational safety.
Illustrates safety sticker locations and explains their hazard warnings and meanings.
Explains the function of stop cocks and the SMV emblem for machine safety and visibility.
Describes the support jack for stability and the safety chain for trailed machine transport.
Covers overload protection settings and the use of wheel chocks for securing the machine.
Provides an illustrated diagram of the machine with numbered components for identification.
Lists minimum tractor specifications and standard/version-specific machine equipment.
Details how to check and adjust the PTO shaft length for correct tractor compatibility.
Lists essential checks before starting the machine for the first time to ensure proper operation.
Provides instructions for correctly connecting hydraulic lines, including warnings about pressure and contamination.
Guides on correctly installing and securing the PTO shaft for machine operation.
Lists essential checks and preparations before undertaking road travel with the machine.
Warns about tilting hazards when operating on inclines and the need to fix guide wheels.
Details the procedure for safely switching off the machine and securing it against rolling.
Advises using genuine spare parts and highlights the importance of regular maintenance for machine longevity.
Provides a schedule for routine maintenance tasks and their intervals for various machine components.
Details the steps for changing the oil in the main gearbox, including screw locations and oil filling.
Provides comprehensive instructions for storing the machine for winter, including cleaning, lubrication, and protection.
Outlines necessary checks and maintenance steps before the start of a new operating season.
To Next Page