III - 3
Preparing for Operation
3.3.2 Hydraulic connection Swadro 700
• When connecting the hydraulic hoses to the tractor hydraulics relieve all pressures from the
system at either side.
• When connecting the rapid action couplings, make sure that they are clean and dry. Soiling will
result in leaks and damage.
The double windrower requires a single-acting hydraulic
connection to change the rotors from transport to
working position and back.
3.3.3 Hydraulics Connection
The double windrower requires a single-acting and a
double-acting hydraulic connection on the tractor.
KS102326
KS102322
Connection to the double acting control unit:
• (1) blue = - operating width
Connection to the single acting control unit:
• (2) red = - Lifting / Lowering the rotary arms
Attach the supplied wallet (1) for the hydraulic switch
cock (2) behind the tractor cab. Make sure that the
hydraulic hoses are not stretched or pinched during
lifting and sinking.
Each movement function on the machine is preselected at
the hydraulic switch cock.
When installing the wallet on the tractor,
make sure that the switch cock can be
reached by the tractor driver and that the
hydraulic hoses (3) are more than 1 m
from the driver's seat!
3.3.4 Hydraulic single-rotor lifting system
To Next Page
Loading...
