Safety
26
Pos: 12.19.17 / BA/Sicherheit/Ar beiten im Bereic h von Hochspan nungsleitunge n@ 11\mod_12 23357468516_ 78.doc @ 145 505
4.13 Working in the vicinity of power transmission lines
1 Always take great care when working under or in the vicinity of power transmission lines.
2 Ensure that when in operation or being transported, the machine cannot exceed a total
height of approx. 4m.
3 If there is any need to travel under overhead lines, the machine operator must request
information on the rated voltage and the minimum height of the overhead lines from the
overhead line operator.
4 Always keep the safety distances according to the table.
Rated voltage
kV
Safe distance from overhead lines
m
To 1 1
Above 1 to 110 2
Above 101 to 220 3
Above 220 to 380 4
Pos: 12.19.18 / BA/Sicherheit/Eig enmächtiger U mbau und Ers atzteilherstellung @ 1\mod_120 1937705539_78.d oc @ 55745
4.14 Unauthorised Conversion/Modification and Spare Parts Production
Conversions or modifications of the machine are permitted only with prior consultation with the
manufacturer. Original spare parts and accessories authorised by the manufacturer help to
ensure safety. Use of other parts may void liability for resulting damage.
Pos: 12.19.19 / BA/Sicherheit/Unzul ässige Betrie bsweisen @ 11 \mod_1223357 699923_78.doc @ 145527
4.15 Inadmissible Modes of Operation
The operating safety of the delivered machine is guaranteed only when it is used as intended in
compliance with the introductory section "Intended use" of the operating instructions. The limit
values listed in the data charts should not be exceeded under any circumstances.
Pos: 12.19.20 / BA/Sicherheit/Sich erheitshinweise a n der Maschi ne @ 1\mod_1 201937861961_ 78.doc @ 557 83
4.16 Safety Instructions on the Machine
The safety instructions on the machine warn of residual risks associated with the machine. They
consist of warning pictograms and a work safety symbol. All safety instructions must be
followed. Always keep the safety instructions clean and in clearly legible condition! If any safety
instructions are damaged or missing, request them from your dealer and then put them in the
places provided for them. Where these safety instructions are and what they mean will be
described in the following chapters.
Pos: 13 /BA/----- Seitenumbruch---- -- @ 0\mod_1 196175311226 _0.doc @ 416 5
To Next Page
Loading...
